Product structure and working principle of: 
 This series of crusher chassis welded together using high quality materials, mill feed inlet in the top of the feed with various forms of structural match, hammer symmetrical arrangement. Mill work, the material into the crushing chamber, rotating sieve hammer blow and the friction, the material gradually be crushed, and the effect of centrifugal force and air flow. Through the bottom of the discharge port. 

 Use Safety Precautions: 
 1, to avoid the machine in the transport, handling and other aspects of the unexpected, all parts must be checked before use bolts and nuts are loose, flat teeth, round teeth, spindle nut without loosening. Rotate the pulley, the machine checks whether the collision phenomenon. 
 2, turning the machine is flexible, if there is debris inside the machine, turn idle 3 minutes, no abnormal phenomenon, to begin operation. 
 3, the work must pay attention to the material in the debris removal, non-iron stones and other objects into the machine, so as not to damage machines wounding. 
 4, then there should be four meters above the feed bag length and diameter of 0.6 m, fabrics can not be too dense, the use of the material in a timely manner to ensure adequate ventilation bag. 
 5, feeding should be uniform, pay attention to the load power level in order to avoid choking. Crushed particles can be drawn when the feed amount board regulator section.